Common problems with Antminer water cooling

The surge in Bitcoin prices has made mining more popular, making it hard to find a mining machine. Mining machines are a powerful tool for mining Bitcoin, but they make a lot of noise when working, which is a headache for many people. Some people have adopted the method of modifying water cooling, but there are always some minor problems in the modification process. Here are some common problems for your reference!

Which models of mining machines support water cooling modification?

Currently, most of the miners supported by the modification include Antminer, Ebit, and Shenma. Avalon miners are not supported yet.

How low can the temperature be after the mining machine is modified?

A: Because the heat sink attached to the hashboard is difficult to remove for some Antminer models, we use a splint-type method to dissipate heat for the miner. Its main purpose is to reduce noise. (After the modification, we tested the room temperature at 23 degrees and the machine at around 60 degrees)

How much noise is there after the modification?

A: After the modification, the noise of the mining machine is similar to that of a home computer. Since water cooling reduces the temperature of the heat sink, the speed of the fan is greatly reduced, and there is no low-frequency howling sound.

The only issue left is the noise from the power supply. It is recommended to use a silent power supply.

Can the original fan of the mining machine be removed?

Of course, you can, as long as you can solve the control board detection fan problem, before solving this detection problem, you still have to use the original fan to deal with the detection. Generally, it is full speed when it is turned on, and the speed drops to more than 1,000 revolutions after normal operation, which is very quiet.