Ant A3 Fishpond SC Single Mining Tutorial

1. Preparation

1. Hardware preparation: an A3 Asic professional mining machine, a power supply equipped with the mining machine, an Internet cable, and a computer.

2. Download the IP search software: https://pan.baidu.com/s/1o8UiM3C .

3. Prepare a SC wallet address. You can get it from the trading platform (P network, B network, etc.).

Tutorial on how to get SC wallet address - local wallet: https://www.f2pool.com/help/profits/sc-wallet

Tutorial on how to get SC wallet address - P network: https://www.f2pool.com/help/profits/sc-poloniex

2. Mining machine assembly

1. First, connect the network cable and insert it into the network cable interface of the mining machine.

2. Then connect the power cord and connect the various interfaces of the mining machine power supply to the mining machine. The power supply has 10 wires, which are connected to the control board and the computing board respectively. After connecting all the wires, you can turn on the power supply. At this time, the light of the mining machine starts to light up and the machine starts to run.

3. Find the mining machine IP

Unzip the downloaded IP Finder and double-click IPReporter in the folder.

Click "Start", then press and hold the IP Reporter button of the mining machine for one second and then release it.

At this time, the IP address of the mining machine will automatically pop up on the software. Copy the IP address to the browser.

Open the browser, paste the mining machine IP found above into the browser address bar, press Enter, in the pop-up authentication, enter "root" for both the username and password, and click OK.

4. Set up the mining machine background

1. Fixed mining machine IP

At this time, we will enter the background of the mining machine management. In Network/Settings, change the Protocol to Static, and then click "Save&Apply". In this way, the IP of this mining machine will be fixed to 192.168.2.168, and then you can directly use this IP to log in to the background of the mining machine.

2. Mining pool and miner settings

In Miner Configuration/General Settings, set up three mining pools and miners respectively.

URL : Fill in the SC mining address sc.f2pool.com:7778 (see the figure below).

Worker : Create a miner name. The format is: wallet address . Numbers or lowercase letters or a combination of both. One miner name is enough for one mining machine. For example: 323b7baae0bf16ec8f505a3c344ae82eed1950119ff22753218446ad29ac38bbfaabe343f173.1

Password : miner password (can be set at will).

After setting up the three mining pools and miners, click “Save&Apply” in the lower right corner.

5. Check the running status of the mining machine

After a while, enter Miner Status and the operation status of the mining machine will appear.

6. F2Pool official website monitors computing power and revenue

Open the F2Pool official website http://www.f2pool.com/, enter your SC wallet address in the address bar in the upper right corner of the homepage, and then press Enter, the page will jump to your miner and income monitoring page. Or directly open the URL https://www.f2pool.com/sc/wallet address, for example: https://www.f2pool.com/sc/323b7baae0bf16ec8f505a3c344ae82eed1950119ff22753218446ad29ac38bbfaabe343f173/323b7baae0bf16ec8f505a3c344ae82eed1950119ff22753218446ad29ac38bbfaabe343f173

The SC deductible is 500SC, and it is settled only once a day. If the account balance is enough for the deductible at 8 am, it will be automatically settled and the payment will be credited to the account on the same day. The payment time is 8:00-16:00. If the account balance is not enough at 8 am, it cannot be settled and will be determined at 8 am the next day.

Antminer A3 SC: http://www.wabi.com/product/6.html