What is the fastest way to remove moles? What is the best method to remove moles?

Many people have moles on their bodies or faces, and mole marks will affect their appearance, so people choose to remove moles. So what is the fastest way to remove moles? Let’s follow the editor to find out. Next, follow the editor to learn more about the position of moles and destiny chart.

What is the fastest way to remove moles?

Everyone has moles, which are small black spots that appear on the skin to a greater or lesser extent. Most people have moles on their bodies, and a very small number of people have moles on their faces. People who have certain requirements for their appearance are rather disgusted with moles on their faces, so they will think about removing moles.

There is no harm in having moles on the human body, because the possibility of moles mutation is extremely small. It just has a certain impact on the appearance. If you want to treat the mole, it is best to choose some better methods to avoid causing some damage to the skin.

Currently, the best way to remove moles is laser plastic surgery. At present, the feedback on laser cosmetic mole removal is relatively good. Its working principle is to use pulsed laser to remove moles on the skin, thereby achieving the effect of cosmetic whitening and spot removal.

Note:

Laser mole removal is not recommended for pregnant women. Do not let the removed area come into contact with water within one week after the removal. If it is on the face, it is best not to wear makeup or rub the face hard to avoid wound infection.

What is the best method to remove moles?

Electrocautery

Method: Use the principle of electric high-temperature burning to remove the mole by burning and carbonization.

Advantages: Easy to operate.

Disadvantages: It is difficult to control the degree of burning, it is easy to leave scars, and it is not accepted by people.

Indications: It is effective for shallow combined nevi and deeper and raised compound nevi, and for nevi with a diameter of 0.3-0.5 cm.

Surgical resection

Method: Surgical removal of the diseased tissue around the mole.

Advantages: This method can choose to partially or completely remove the diseased tissue, and different treatment methods can be used depending on the nature of the mole.

Disadvantages: It is difficult and time-consuming, so this method is rarely used for common moles.

Indications: Large, raised moles with a diameter greater than 0.6 cm.

Chemical corrosion

Method: Generally, a 50% concentration of trinitrocarbonic acid solution or alkaline agents such as sodium hydroxide are applied to the mole.

Advantages: Tricarbonic acid solution is not easy to burn the skin and cause scars; alkaline solution is highly corrosive and may take effect quickly.

Disadvantages: The effect of trinitrocarbonic acid solution is slow, and deeper moles may need to be treated 10 times; the corrosion depth of sodium hydroxide is not easy to control and may cause deep scars.

Indications: Moles with lighter color and shallow location.

Freezing method

Method: Use liquid nitrogen to freeze the nevus tissue extremely quickly, causing the cells around the nevus to form blisters and then fall off on their own.

Advantages: The depth of destruction is relatively easy to control, it can usually be done in one go, and it is not easy to cause obvious scars.

Disadvantages: Large and thick moles need to be frozen multiple times to be removed, and special instruments must be used. The doctor's skills are also very important. Dermatology is not used to treat moles because the depth is difficult to control and often causes damage.

Indications: Flat moles with a diameter of 0.3-0.5 cm, including freckles, etc.

Laser mole removal

Principle: Use the laser to burst out huge energy in an instant to act on the pigmented tissue, so that the pigment is broken up and decomposed, and then swallowed up by macrophages and excreted from the body, achieving the purpose of removing pigment.

Method: For shallow moles, laser can be used to remove them, such as ruby ​​laser, erbium laser, etc.; if it is a larger and deeper mole, carbon dioxide ultra-pulse laser should be used to remove it.

Advantages: Laser mole removal can control the size and depth of the optimal light spot, and is less likely to leave scars or become infected.

Disadvantages: No disadvantages, accepted by most people and popular.

Indications: Most moles, including deep and shallow moles, can be treated.

Summary: Through the above article, we know the advantages and disadvantages of several methods of removing moles. I hope it can help friends in need!

The above is what the editor has compiled for you: "What is the fastest way to remove moles? What is the best method to remove moles? 》For more exciting zodiac content, please follow the Xiong Zhang account.